Forums » News and Announcements

The Level Of Responsibility Of DOME Fiber Closure

  • March 8, 2019 12:40 AM EST


    Focus On Improving The Level Of Responsibility Of DOME Fiber Closure


    The main reason for poor insulation between the fiber and the ground is that water enters the DOME Fiber Closure . The maintenance department often finds water in the closure of the fiber optic connector during routine maintenance. The fibers are soaked in water for a long time, which causes the coating to fall off and the properties of the fiber to change. This causes the fiber to be fragile and affect the normal use of the cable. The fiber optic cable must be cut. Gradually replace the fiber optic connector closure.

    Do not use the shelf life sealant, strictly control the transportation and laying quality of the cable, and must not damage the outer cable jacket; select the appropriate fiber connector box according to the cable laying method; the fiber connector box is installed above the perennial water level, and the terrain is relatively low. At high altitudes, avoid long-term soaking of water in the fiber optic splice box; it is not recommended for rainy days, especially fiber optic cable connections; choose a good monitoring line for insulation purposes. The focus is on improving the responsibility and operational level of construction workers and improving the level of operation of manufacturers.

    1. Open the package. Use a clean, well-connected box to see if the box looks clean and flawless.

    2. Inventory attachments. Open the splice box and check all mounting parts and materials for the splice box. Are all the fastening screws complete? Additional accessories in the splice box must be collected as other splice box accessories may be missing.

    3. Clean the box and fiber. Use toilet paper or alcohol cotton to clean the contact surfaces and glue surfaces of the two boxes of the junction box and clean the rubber surface of the cable. The dirty connector box and the inlet connector box can be rinsed with water first. After drying, it must be washed with alcohol and cotton. Fingerprint lubricated rubber can be cleaned with clean alcohol cotton. Do not remove the protective paper until the cover is closed.

    The information about DOME Fiber Closure :