Forums » News and Announcements

Kitchen Faucets Manufacturers Share What Is A Bubbler

  • September 9, 2019 2:07 AM EDT

    When the faucet is used for a while, the water flow will become smaller or no water! Most are caused by blockage of impurities in tap water! The blockage position generally appears in the place where the filter is located and the pipe is suddenly tapered.
    kitchen faucets manufacturers to share which two places are easy to block:

    1 Bubbler: A bubbler is a device that has a water-flow foaming effect and saves water. The bubbler can fully mix the water and air flowing through. With the addition of air, the flushing power of the water is increased a lot, thereby effectively reducing the water consumption and saving water.

    The faucet with the bubbler is like a mist, soft and comfortable, and the impurities in the water are filtered, and it will not splash around. This is the function of the bubbler.

    The bubbler filter filters out impurities in the water, which can block the water outlet for a long time.

    2 hose connection connector:

    Special reminder: The bubbler may not be disassembled. It is recommended that the installation should not be too tight when it is cleaned. The principle of light twisting and no water leakage is convenient for frequent cleaning. When removing the connecting pipe, be sure to turn off the solar energy and water supply valve, and open the faucet to confirm that there is no cold. The hot water starts to disassemble and clean up!

    information about kitchen faucets manufacturers :